Manley Performance - Niche Market

LS LT1 5.3L LS/L83

2.0L EcoBoost 2.3L EcoBoost 3.5L DOHC EcoBoost 3.7L DOHC CYCLONE 4.6L MODULAR 5.0L COYOTE 5.2L VooDoo 5.4L MODULAR 6.2L SOHC RAPTOR

Hemi 5.7L, 6.1L, 6.4L Hemi Hellcat

CHRYSLER HELLCAT

Rods

Pistons

ECONOMICAL "H" BEAM STEEL RODS - learn more about our connecting rods
Manley "H" Beam connecting rods are manufactured from 4340 forgings to the same exacting standards developed and approved by our original equipment customers. There is a vast difference in quality between a Manley "H" Beam and the "other" inexpensive H-Beams on the market. Weight matched to +/- 1.5 grams. Perfectly round big and small ends. Bend and twist is tightly controlled. Cap fasteners are 7/16" ARP cap screws.

Part No.	Center-to Center	Big End Bore	Big End Width	Pin End Width	Pin Bore	Gram Weight

Chrysler/Dodge HEMI 6.2L Stock Length with ARP 8740 Cap Fasteners

14088-8	6.200" (6.2L)	2.252"	.933"	1.000"	.9281" (SB Chevy)	665

14089-8	6.200" (6.2L)	2.252"	.933"	1.000"	.9457" (Stock 6.2L)	670

Chrysler/Dodge HEMI 6.2L Stock Length with ARP 2000 Cap Fasteners

14088R-8	6.200" (6.2L)	2.252"	.933"	1.000"	.9281" (SB Chevy)	666

14089R-8	6.200" (6.2L)	2.252"	.933"	1.000"	.9457" (Stock 6.2L)	671

H-TUFF SERIES RODS

Manufactured from 4340 forgings
Heat treated, stress relieved, shot peened and 100% magnafluxed
Weight matched sets + 1.5 grams
Cap fasteners are premium 7/16" ARP 2000 cap screws
Flywheel horsepower range for these rods: 1,000 HP (Oval Track), 1,200+ HP (Drag Race)
Bridges the gap between our standard, proven H-Beams and top of the line, best of the best Pro Series I-Beam rods
H-Tuff delivers a stronger rod with greater safety margin to handle elevated boost and higher power levels for a modest price premium over standard H-Beams
H-Tuff design incorporates wider beam and increased cross-sectional thickness in critical areas along with a ribbed pin surround

Part No.	Center-to Center	Big End Bore	Big End Width	Pin End Width	Pin Bore	Gram Weight

Chrysler/Dodge HEMI 6.2L Stock Length with SB Chevy .927" Pin

15088R-8	6.200"	2.252"	.933"	1.000"	.9281"	705

Chrysler/Dodge HEMI 6.2L Stock Length with Stock .945"/24mm Pin

15089R-8	6.200"	2.252"	.933"	1.000"	.9457"	710

PRO SERIES "I" BEAM STEEL RODS - learn more about our connecting rods
Manley Pro Series connecting rods are forged from aircraft quality 4340 vacuum degassed material. Each rod is fully machined in the Manley Lakewood, NJ factory to the highest standards. Our signature "Pro Series Lightweight" design combines the appropriate weight and rugged strength for ultimate horsepower applications. Each rod is shot peened after machining and magnafluxed. Bores are held to exacting tolerances. Bend and twist is tightly controlled. Cap fasteners are 7/16" ARP 2000 or optional 7/16" ARP Custom Age 625 cap screws.

These rods are also available with ARP 625+ fasteners. To order, affix an "R6" to the part number.

Part No.	Center-to Center	Big End Bore	Big End Width	Pin End Width	Pin Bore	Gram Weight

STANDARD WEIGHT

6.2L Stock Length Heavier beam for forced induction applications

14562-8	6.200"	2.252"	.933"	1.000"	.9281" or .9457"	685

The above connecting rods are supplied with 1.450" under head length 7/16" ARP 2000 cap screw fasteners P/N 42390. Upgraded 7/16" ARP Custom Age 625+ cap screws P/N 42252 are available. To order upgraded fasteners, affix "R6" after the rod part number.